1. Home
  2. HP
  3. HPE7-A11 Exam

HPE7-A11 HPE Network Campus Access Professional Architect Exam Topics and Questions

Let's Practice Free HPE7-A11 Questions Aligned with Official Exam Topics

Follows HP's official outline Updated 10 Nov, 2026 4 Topics
Reviewed by Robert Johnson, HP HPE7-A11 Certified Professional
Topic Content

This is where the entire engagement is won or lost before a single cable is specified. Discovery sets the foundation for every design decision that follows, and the exam treats it seriously: at 23%, roughly one in four questions tests whether you know how to extract, organise, and document what a customer actually needs. Gaps here compound into wrong designs later, and the exam is built to catch that chain of errors. – Stakeholders and their roles Knowing who to...

See More

The question below puts you in a live discovery scenario and asks you to make the call a professional architect would make at that moment.

Sample Questions for Topic 1 : Discover customers' requirements
Q1

You are developing a technical proposal for a customer that plans to deploy HPE Aruba Networking Cloud Central-managed AOS-10 Access Points in a typical campus office environment. The customer has used ARM-based radio resource management successfully for many years. During their transition to AOS-10, they ask for guidance on suitable initial EIRP (Effective Isotropic Radiated Power) values for new radio profiles in HPE Aruba Networking Central.

Which EIRP configuration option should be recommended as an appropriate starting point for this office deployment?

Topic Content

Once discovery is complete, the work shifts from listening to deciding. Analysis is where requirements become technology choices, diagrams, and a preliminary bill of materials, and at 30% it is the single heaviest topic on the exam. The gap candidates fall into here is treating analysis as a mechanical translation of requirements into products. The exam is testing design judgement, not product recall, and the questions are written to separate the two. – Technology selection Identifying technologies to satisfy requirements...

See More

The question below presents an analysis scenario and asks you to apply the kind of design judgement this topic rewards.

Sample Questions for Topic 2 : Analyze requirements
Q2

A global cruise line company must refresh its current fleet. It will refresh the ship's ''insides'' to be cost-effective and improve sustainability, replacing all WLAN/LAN hardware. During this refresh, the company will not change its existing security requirements. The CIO also wants to minimize unused switch ports. Any future expansion will require a hardware refresh. They will begin with the smallest ship, with a maximum of 800 guests.

Each ship has a LAN infrastructure comprising two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches are in the ship's MDF, and the distribution switches are in the IDFs. Each cabin and technical room receives one individual access switch.

The ship's cabling infrastructure will not be refreshed. Every IDF is connected to the MDF by SMF, with two pairs available for the interconnect between core and distribution. The SM fiber between the MDF and IDF is less than 300 meters (980 ft) long and is OS1. Each cabin is connected to the IDF by one OM2 pair, with a maximum length of 60 meters (200 ft). Each technical room is connected to the IDF by one OM2 pair, with lengths from 100 to 150 meters (320 to 500 ft).

For every cabin/technical room, the customer wants to replace the existing fan-less 2530/2540 switches without changing the requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and the technical rooms require redundant power.

The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. The WLAN infrastructure uses 200/300 series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no WLAN requirement changes.

The cruise line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will provide 99.8% uptime, required to keep paid guest Wi-Fi operational. With this new Internet connection, the CIO wants to base the design on Aruba's ESP architecture because the Internet connection is guaranteed.

Based on best practices, what optic type should be recommended for the connection between the IDF and the technical rooms?

Topic Content

Analysis produces inputs; architecture produces commitments. This topic is about turning a validated set of requirements and technology choices into documents that a customer, a project manager, and an implementation team can each act on. At 30%, it matches the previous topic in weight, but the demand shifts from design judgement to communication precision. A technically sound design that is poorly documented will fail here just as reliably as a weak design. – Proposal and BoM finalisation The technical proposal...

See More

The question below draws from this topic and tests the kind of cross-document or audience-awareness judgement the exam rewards here.

Topic Content

Architecture that cannot be communicated and defended does not get built. This final topic moves from documents to dialogue, testing whether you can present a solution to a customer and hold your ground when it is challenged. At 17%, it is the lightest topic on the exam, but the skills it tests are distinct from everything that came before. Candidates who are strong on technical design sometimes underestimate this area and lose marks they could have held. How Propose the...

See More

The question below puts you in the proposal room and asks you to respond the way the exam expects a professional architect to respond.

Ready to Start Practicing?

Access all questions and start your exam preparation journey

Upgrade to Full HPE7-A11 Exam Questions πŸš€
Exams Made Simple. Success Made Possible.