HPE2-T37 Using HPE OneView Exam Topics and Questions
These HP Using HPE OneView (HPE2-T37) exam topics are organized according to official exam domains to help candidates quickly verify coverage and focus on assessment rather than theory. Each domain is paired with topic-wise HPE2-T37 sample questions that reflect how objectives are tested in the actual exam. This structure enables efficient review, targeted self-assessment, and rapid identification of weak areas when preparing for the HP Using HPE OneView certification exam.
Let's Practice Free HPE2-T37 Questions Aligned with Official Exam Topics
This opening topic carries the lightest weight on the exam but sets the foundation for everything that follows. You need to demonstrate familiarity with the broader infrastructure management landscape before HPE OneView appears. The domain covers standards, protocols, and approaches that existed before software-defined infrastructure became the norm. Candidates who treat this as a quick win often miss the nuance: the exam wants you to recognize when a legacy approach still applies and when it does not. The two percent...
This opening topic carries the lightest weight on the exam but sets the foundation for everything that follows. You need to demonstrate familiarity with the broader infrastructure management landscape before HPE OneView appears. The domain covers standards, protocols, and approaches that existed before software-defined infrastructure became the norm. Candidates who treat this as a quick win often miss the nuance: the exam wants you to recognize when a legacy approach still applies and when it does not. The two percent weighting means you will see only a handful of items here, but each one tests whether you can distinguish between competing management paradigms. Misreading the context costs marks even when you know the technology. The material itself is not obscure, but the questions lean on comparison and appropriateness rather than recall. You need to know what each standard does, where it fits in a modern stack, and why an organization might choose one over another. The exam assumes you have worked with data center hardware and understand the operational pressures that drive tool selection. If your background is purely in virtualization or cloud, spend time on the physical layer and the protocols that connect it to management planes.
How Describe industry standard data center infrastructure management technologies is tested
With only two percent of the total score, you will face two or three items at most. Each one presents a scenario where multiple management technologies could apply, and the task is to pick the one that fits the constraints. Items reward recognizing the scope and limitations of each standard rather than reciting definitions. A typical stem describes an environment with specific hardware, network topology, or operational requirements, then asks which technology provides the needed capability. The distractor options are plausible and often represent valid tools in a different context. Candidates lose marks by defaulting to the most familiar name instead of reading the scenario closely. The exam also tests boundaries: when a standard stops being useful, what replaces it, and why. You will not see pure trivia about protocol version numbers or committee names. Instead, the focus is on practical decision-making under real-world constraints. If you cannot explain why IPMI matters in a lights-out environment or when SNMP becomes a bottleneck, review those use cases before sitting the exam.
The practice test gives you early exposure to how HPE frames comparison questions. The PDF format lets you review each scenario at your own pace, checking whether you picked the technology for the right reason or just the one you recognized first.
The question below presents a management scenario and asks you to choose the appropriate standard.
Your customer wants to know what will happen If a server is positioned in maintenance mode using HPE Oneview. How should you respond?
From industry-wide standards, the focus narrows to HPE's own platform. This topic carries more than six times the weight of the first and introduces the product architecture, its components, and the business case you will need to articulate. You are expected to know what OneView is, how its pieces fit together, and why an organization would adopt it over competing tools or manual processes. The exam tests positioning as much as technical detail: you need to match OneView capabilities to...
From industry-wide standards, the focus narrows to HPE's own platform. This topic carries more than six times the weight of the first and introduces the product architecture, its components, and the business case you will need to articulate. You are expected to know what OneView is, how its pieces fit together, and why an organization would adopt it over competing tools or manual processes. The exam tests positioning as much as technical detail: you need to match OneView capabilities to business objectives and recognize when it solves a problem and when it does not.
How Describe HPE OneView and its elements and positioning for customer business outcomes is tested
Thirteen percent translates to roughly ten to twelve items, and they divide between architecture and business justification. On the architecture side, items reward identifying which OneView component handles a given task, how components communicate, and what dependencies exist between them. You will see scenarios that describe a desired outcome, such as automated firmware updates or unified monitoring, and you must select the element responsible. The business-outcome questions present a customer requirement, often phrased in non-technical language, and ask which OneView feature addresses it. Candidates lose marks by choosing the feature that sounds most impressive rather than the one that meets the stated need. The exam also tests limits: what OneView cannot do, what requires additional products, and where manual intervention is still necessary. Distractor options often describe real OneView capabilities applied to the wrong problem. If you have only used OneView in a lab, find case studies or deployment stories that show how it delivers value in production. The exam assumes you can translate between technical features and business language in both directions.
A question bank helps you see the full range of positioning angles the exam uses. The practice test lets you work through business-outcome scenarios under timed conditions, building the habit of reading for the actual requirement rather than the most advanced feature.
The question that follows asks you to connect a business need to the OneView capability that addresses it.
Your customer wants to update firmware for a compute node with no server Which server hardware can support this feature?
With the product introduced, the exam moves to design. This is the heaviest conceptual topic, asking you to plan a OneView deployment from requirements through to architecture. You will work with constraints: existing infrastructure, performance targets, availability requirements, and integration points. The fifteen percent weighting means this is where candidates who can apply knowledge pull ahead of those who only memorized features. Design questions do not ask what OneView can do; they ask what you should do with it in...
With the product introduced, the exam moves to design. This is the heaviest conceptual topic, asking you to plan a OneView deployment from requirements through to architecture. You will work with constraints: existing infrastructure, performance targets, availability requirements, and integration points. The fifteen percent weighting means this is where candidates who can apply knowledge pull ahead of those who only memorized features. Design questions do not ask what OneView can do; they ask what you should do with it in a specific context.
How Architect and design a data center management solution using the HPE OneView is tested
Expect twelve to fourteen items, most of them scenario-based. A typical stem describes an organization's current state, lists requirements such as high availability or disaster recovery, and asks you to design the OneView deployment that meets them. Items reward choosing the architecture that satisfies all constraints without over-engineering. You will also see questions about sizing: how many appliances, where to place them, what hardware resources they need. The exam tests trade-offs. One design might offer better performance but higher cost; another might meet the SLA with less complexity. Candidates lose marks by defaulting to the largest or most redundant option when the scenario does not justify it. You need to recognize when a single appliance is sufficient, when clustering is required, and when federation comes into play. Integration questions ask how OneView fits with existing tools, such as monitoring platforms or ticketing systems. The distractor options are technically possible but violate a stated requirement or introduce unnecessary risk. If you have not designed a deployment from scratch, walk through a few hypothetical scenarios before the exam, writing down your decisions and the reasoning behind them.
Volume matters when learning design principles. The practice test exposes you to the full variety of constraints and trade-offs the exam presents, so you spot the hidden requirement in a scenario rather than picking the first plausible option.
The scenario below gives you an organization's requirements and asks you to select the appropriate OneView architecture.
This is the heaviest single topic, accounting for more than a quarter of your score. The exam shifts from planning to execution: deploying the appliance, configuring its settings, integrating it with infrastructure, and preparing it for production use. The weight reflects the breadth of tasks involved. You will face questions on initial setup, network configuration, authentication, licensing, firmware baselines, and the integration of enclosures, servers, storage, and networking hardware. Mistakes here are costly, both in the exam and in real...
This is the heaviest single topic, accounting for more than a quarter of your score. The exam shifts from planning to execution: deploying the appliance, configuring its settings, integrating it with infrastructure, and preparing it for production use. The weight reflects the breadth of tasks involved. You will face questions on initial setup, network configuration, authentication, licensing, firmware baselines, and the integration of enclosures, servers, storage, and networking hardware. Mistakes here are costly, both in the exam and in real deployments.
How Install and configure HPE OneView and related elements is tested
With twenty-seven percent of the total, expect twenty to twenty-five items. They span the entire installation and configuration lifecycle, from appliance deployment through to the first managed resources. Items reward knowing the correct sequence of steps, the prerequisites for each task, and the impact of configuration choices. You will see questions that describe an installation failure or a configuration that does not behave as expected, then ask what went wrong or what to check. The exam tests both happy-path knowledge and troubleshooting during setup. Candidates lose marks by skipping prerequisite steps, misconfiguring network settings, or applying firmware updates in the wrong order. You need to know which tasks can run in parallel and which must complete before others begin. Authentication and directory integration questions ask how to connect OneView to LDAP or Active Directory, what permissions are required, and how to troubleshoot login failures. Licensing questions test what features require which license tier. Integration items focus on adding hardware: what information OneView needs, what happens during discovery, and how to resolve conflicts when existing configurations clash with OneView's expectations. If your hands-on time has been limited, step through a full installation in a lab or simulator, deliberately introducing errors to see how the system responds.
Installation and configuration generate the most item variety on the exam. The PDF lets you study the question styles at your own pace, while the practice test's timer forces you to recall procedures quickly, the way you will need to on exam day.
The item below tests a specific step in the installation or configuration process and asks you to identify the required action or setting.
Once OneView is installed, the next task is provisioning: turning the platform into a tool that delivers infrastructure on demand. This topic carries nearly a quarter of the exam and covers server profiles, templates, networking configuration, storage attachment, and the automation that ties them together. Provisioning is where OneView's value becomes visible, and the exam tests whether you can use it to deploy resources quickly, consistently, and correctly. You will work with profiles that define server identity, templates that enforce...
Once OneView is installed, the next task is provisioning: turning the platform into a tool that delivers infrastructure on demand. This topic carries nearly a quarter of the exam and covers server profiles, templates, networking configuration, storage attachment, and the automation that ties them together. Provisioning is where OneView's value becomes visible, and the exam tests whether you can use it to deploy resources quickly, consistently, and correctly. You will work with profiles that define server identity, templates that enforce standards, and the logical constructs that abstract physical hardware. The weight reflects how central this activity is to OneView's purpose.
How Provision Hybrid IT infrastructure using HPE OneView is tested
Expect eighteen to twenty-two items. Most focus on server profiles and templates: what they contain, how they differ, when to use each, and what happens when you apply or update them. Items reward understanding the relationship between a profile and the physical server it targets, and knowing what changes require a reboot or a reprovisioning step. You will see questions about networking: how to assign connections, configure VLANs, set bandwidth limits, and attach servers to fabric. Storage questions ask how to map volumes, configure boot-from-SAN, and handle multipath settings. The exam also tests automation: how to use templates to enforce consistency, how to clone profiles, and what happens when a profile's source template changes. Candidates lose marks by confusing profiles with templates, applying updates without understanding their impact, or misconfiguring network or storage settings that prevent the server from booting. The distractor options often describe steps that work in other contexts but not the one presented. If you have provisioned only a handful of servers, practice creating profiles with different configurations, then modifying and redeploying them to see what changes and what stays the same.
Provisioning questions often turn on small details: which setting belongs in the profile versus the template, or what happens when you change a connection's network assignment. The practice test gives you enough volume to spot those patterns before the exam.
The question that follows asks you to perform or troubleshoot a provisioning task using server profiles or templates.
After provisioning comes ongoing management. This topic covers the operational tasks that keep infrastructure running: monitoring health, managing firmware, applying updates, generating reports, and responding to alerts. Eleven percent is a moderate weight, but the scope is broad. You need to know how OneView surfaces problems, what actions you can take in response, and how to extract the information stakeholders need. The exam assumes the infrastructure is already deployed and tests your ability to keep it compliant, healthy, and documented....
After provisioning comes ongoing management. This topic covers the operational tasks that keep infrastructure running: monitoring health, managing firmware, applying updates, generating reports, and responding to alerts. Eleven percent is a moderate weight, but the scope is broad. You need to know how OneView surfaces problems, what actions you can take in response, and how to extract the information stakeholders need. The exam assumes the infrastructure is already deployed and tests your ability to keep it compliant, healthy, and documented.
How Manage and report on Hybrid IT infrastructure using HPE OneView is tested
You will face eight to ten items. They cover firmware management, health monitoring, alerting, and reporting. Firmware questions ask how to create and apply baselines, what happens when a component is out of compliance, and how to schedule updates to minimize disruption. Monitoring items describe a health status or alert and ask what it means or what to do next. Reporting questions test your ability to generate the right report for a given purpose: compliance audits, capacity planning, or performance analysis. Items reward knowing which report format to use, what data it includes, and how to filter or schedule it. Candidates lose marks by choosing a report that contains related information but does not answer the question asked, or by applying a firmware update without checking dependencies. You also need to know how OneView integrates with external monitoring and ticketing tools, and what data it can send to them. The exam tests operational discipline: do you check prerequisites, verify compatibility, and schedule changes during maintenance windows, or do you push updates immediately and hope for the best. If your experience is mostly with initial deployments, spend time on the management and reporting interfaces to understand what information is available and how to act on it.
Management and reporting questions test whether you can find the right tool for the task. The practice test lets you see the full range of scenarios, so you recognize the difference between a firmware compliance issue and a health alert that needs immediate action.
The scenario below describes a management or reporting task and asks you to choose the appropriate action or report type.
The final topic focuses on troubleshooting. Eight percent is the second-lightest weight, but the questions are often the hardest because they test applied knowledge under failure conditions. You will see symptoms, error messages, or performance problems and need to identify the cause and the fix. The exam assumes you understand how OneView works when everything is correct, and now asks what to do when it is not. Troubleshooting items reward methodical thinking: isolating the problem, checking the most likely causes...
The final topic focuses on troubleshooting. Eight percent is the second-lightest weight, but the questions are often the hardest because they test applied knowledge under failure conditions. You will see symptoms, error messages, or performance problems and need to identify the cause and the fix. The exam assumes you understand how OneView works when everything is correct, and now asks what to do when it is not. Troubleshooting items reward methodical thinking: isolating the problem, checking the most likely causes first, and knowing which logs or diagnostics to consult. Candidates who guess or jump to conclusions lose marks quickly.
How Monitor and troubleshoot common Hybrid IT infrastructure issues using HPE OneView is tested
Expect six to eight items. Each describes a problem: a server that will not provision, a firmware update that fails, an alert that keeps recurring, or a performance issue that affects multiple resources. Items reward identifying the root cause and knowing what to check or change to resolve it. The exam tests your ability to read symptoms and map them to underlying issues. You will not see obscure edge cases, but you will see common problems that look like something else. Candidates lose marks by treating the symptom instead of the cause, or by choosing a fix that works in a different scenario but not the one described. You need to know where OneView logs information, how to interpret error messages, and what diagnostics to run when standard troubleshooting does not reveal the issue. The distractor options often describe valid troubleshooting steps applied in the wrong order or to the wrong component. If you have not encountered many failures, review common issues in the documentation or user forums, paying attention to how experienced administrators isolate and resolve them. The exam rewards a disciplined approach more than deep technical knowledge of every possible failure mode.
Troubleshooting questions are hard to prepare for without seeing a wide variety of failure scenarios. The question bank exposes you to the common problems and their symptoms, so you recognize patterns rather than guessing under pressure on exam day.
The final question presents a failure or performance issue and asks you to identify the cause or the steps needed to resolve it.
Ready to Start Practicing?
Access all questions and start your exam preparation journey
Upgrade to Full HPE2-T37 Exam Questions 🚀
